قالب وردپرس درنا توس
Home / Tips and Tricks / How to add solutions, dryers, fades and other video transitions in the Enlight Videoleap for iPhone "iOS & iPhone :: Gadget Hacks

How to add solutions, dryers, fades and other video transitions in the Enlight Videoleap for iPhone "iOS & iPhone :: Gadget Hacks



An edited video with many different clips needs great transitions to succeed. Transitions support your story and your message, and there is always a chance that your audience may lose what happens and when. When editing in the Enlight Videoleap for iOS, you can easily add cutting, resolution, iris, wipe, slide and fade transitions to your videos with a few cranes.

Even if you just edit a video to be shared with friends and family, transitions are an important part of the editing process, as they not only help your shots fit together and make your story less confusing, they also set a certain note or mood needed if you are editing a more serious

Videoleap makes transitions simple, but before moving on to see how you make sure you update "Enleap Videoleap Video Editor" so you have all the latest features.

Step 1
: Find media you want to cut

If you are already working on an existing project, skip to Step 2. If not, press the red and white plus (+) sign to add a video or a photograph for your project. The media importer is displayed. Tap the lower left tab to select an album from your Photos app, or click the lower right "Layers" tab to see stock videos and photos, some of which are free. Select the video or photo to add it to your timeline.

To add more clips to your project, press the red and white plus sign (+) that appears next to any clips you have already added. They will drop in on both sides of a clip already in the timeline, depending on where your game head is. However, a clip is enough to use transitions because you can apply them at the beginning or end of a solo clip and you can also use the "Split" tool to create different clips from one.

Once you have added the entire video clip and picture, you can press and hold a clip to either change the position or drag it to the trash to delete it.

Step 3: Add Transitions

Now that all clips are in order and the same size, it's time to use the "Transition" tool to improve your project. Although it is easy and quick to add a transition between clips (it only takes a few cranes), it is a bit more complicated when using transitions at the beginning or end of the entire project, whether it's just a clip or a timeline full of various media.

Option 1: Add Cuts

Video Leap automatically adds transitions if you add more than one clip or photo to your project. These are called cuts, which is the most basic type of shot transition, which allows for continuity between the rocks. The two clips play one after another, where an image replaces another one directly.

Option 2: Add Clip-to-Clip Transitions

To add the transition between video clips, tap the dark gray part of the timeline so that no clip or photo is selected. It will reveal the transition icon, a white rounded box with a vertical line in the middle, between all your media. If a clip is selected, the transition icon will not be displayed before or after the selected clip.

Select the transition icon for where you want to add the transitions and the toolbar changes so that all available clips appear -clip transitions. All of these transitions, except for "None", move the second clip forward so that it appears during the first during the transition, which means that the length of your timeline becomes slightly shorter for the adjustment. It also doesn't extend the video clip, just moving the other clip.

  • None : A clip replaces another immediately. This is the cut we just talked about above.
  • Resolve : One clip gradually replaces another. The end of the first clip will change the opacity until it is no longer visible, revealing the second clip during the process.
  • Iris Out : From the beginning of the frame opens a small circle showing the clip below it, and it continues to expand as a shutter opening until the circle is gone and the other clip is completely in the frame.
  • Iris In: From a beginning, a circle begins to devour the first clip and reveal the other clip around it. The circle continues to be smaller, like a shutter, until it disappears in the middle and the second clip is completely in the frame.
  • Wipe right, left, up or down : The first clip will be shot from the screen, either from left to right (right), right to left (left), bottom to top (up) or top to bottom (down), showing the second clip in the process.
  • Slide right, left, up or down) : The first clip will be pushed off the screen with the second clip either left to right (right), right to left (left) , bottom to top (Up), or top to bottom (Down).
  • Fade : The end of the first clip is quickly resolved into a black screen and then resolves back into the second clip. Basically, the first clip fades out quickly and the other one floats in.

When selecting a transition, you can move the bar on the slider under your timeline to decrease or increase the transition length. If you decrease the transition, it will happen faster and will only push the second clip forward a little bit in the timeline. As you increase the transition, it works slower, and it will push the second clip forward for another second or two.

Option 3: Add to Fades Ins & Fade Outs

If you want to add a bleach or fade into a single clip, you must use the keyframe feature. To do this, place the game head at the beginning or end of a clip, tap the clip and add a keyframe marker by tapping the diamond icon with a plus sign. Then press "Opacity" and set it to zero with the slider. Now place the playback head a few seconds forward or backward in the clip, set "Opacity" to 100, and a keyframe will automatically appear.

In Animations:

  • Fade In: This causes the top cut opacity to go from zero to 100 during the selected time, at the beginning of the clip, which shows the clip on the clip or clip during the transition.
  • S jaw left, right, up or down: This will push the upper clip in the frame at the beginning of the clip to take over the lower layer, either right to left, left to right, bottom to top or top to bottom. To shoot out, it will do the same, except that it will push the upper clip out of the frame in the direction indicated.
  • Should be up or down: When upscaling starts the highest cutting frame from centered, not visible, and appears small, continues to scale up in size until it takes over the bottom layer. When you peel down, the upper clip is enlarged, taking over the lower layer immediately and will shrink to normal size.
  • Spin CW or CCW: The former will rotate the top clamp clockwise from the center it dares to take over the entire bottom layer. The latter will do the same, just counterclockwise.
  • Flicker: This causes the top clip to flash on and off for the length of the animation, which shows the bottom layer under the compartments. The top clip takes over when the animation ends.

Without animations:

  • Fade Out: This causes the top clip opacity to go from 100 to zero during the selected time period, at the end of the clip, and displays the clip layer or clip during the transition.
  • Slide left, right, up or down: This will slide the upper clip out of the frame at the end of the clip so that the lower layer takes over, either to the right to the left, to the left to the right, from the bottom to the top or from top to bottom.
  • Shell up or down: When scaling up, the upper cutting frame will expand until it drops into the bottom layer. When you peel off, the upper cutting frame will shrink in size until it is no longer visible, showing the bottom layer of the process.
  • Spin CW or CCW: The former will turn the top clamp clockwise while it scales down into nothing that reveals the bottom layer of the process. The latter will do the same, just counterclockwise.
  • Flicker: This causes the top clip to flash on and off for the length of the animation, which shows the bottom layer under the compartments. The bottom layer takes over when the animation ends.

Touch a clip and then scroll right in the toolbar until you reach the "Mixer" tool. When you press it, the selected clip overlays some other clips after that, giving you an overlay effect. If there are no clips after that, it will allow you to add another clip before continuing.

Next, with the selected best clip, press "Animation" in the toolbar and use either "In" or "Out", depending on where you want to add the transition, ie the beginning or end of the clip. You can do both if you want. Select from one of the transitions above, then move the field in the slider to make the animation shorter or longer.

This article has produced under the Gadget Hack's special coverage on smartphone-based video creator tips for filming and editing. Add, customize and animate text layers in your videos with Enlight Video Leap for iPhone

Cover photo, screenshots and GIF files from Nelson Aguilar / Gadget Hacks

Source link