قالب وردپرس درنا توس
Home / Tips and Tricks / How to connect your Android device to a projector

How to connect your Android device to a projector



  Chromecast
Ben Stockton

Android devices are good, but their small size can sometimes be limiting. When you connect your device to a projector, you can share the screen with others for business or pleasure. Here are some ways to do it.

If you do not have a projector, you can also connect Android to a TV. However, projectors are the better option, as they typically project a much larger screen size than a TV, making them ideal for media playback or data presentations.

RELATED: How to connect your Android phone to your TV

Connect wirelessly via Chromecast

The easiest way to connect an Android device to a projector is to use Google Chromecast. To do this, your projector must support HDMI connections.

When you connect the Chromecast to the HDMI port, you can wirelessly stream the screen of your Android device to it. Your Chromecast will then display the content through the projector.

Make sure you have disabled some power saving mode on your Android device, as it may reduce the quality of the power.

If you don't already have the Google Home app, download and install it from the Google Play Store.

Open the "Home" app, then touch the Accounts tab in the lower right corner.

 Click the Accounts tab in the Google Home app.

Scroll down and tap "Mirror Device."

 On the Accounts tab of the Google Home app, touch Mirror Device

If you see a warning that your device is not "optimized for casting, press" OK. "This should not prevent you from casting your screen to a Chromecast.

 Press

Press "Cast Screen / Audio" and then select your Chromecast to connect to it.

 Press

When connected, your monitor should start streaming to your projector through your Chromecast.

Wired Connections

If a wireless option is not suitable, you can use a fixed connection instead. All Android devices have either a microUSB or USB-C option.

The right cable allows you to connect your Android device to a projector that directly uses an HDMI cable. Another standard Supported is MHL, which also connects via HDMI ports.

USB-C to HDMI cable

Newer Android devices, like the latest Samsung phones, use USB-C to charge. If you have a USB-C drive, you can use a USB-C to HDMI cable to connect your device directly to an HDMI capable projector.

  A USB-C to HDMI cable list on Amazon.
Amazon [19659003] You shouldn't do anything other than connect your USB-C device to your projector. Make sure the projector is set to the correct HDMI input.

However, be aware that a disadvantage of USB-C to HDMI is lack of power. If you use other wired methods, such as MHL, you can operate your device while connected.

Mobile High-Definition Link (MHL)

Mobile High-Definition Link (MHL) uses specially designed HDMI cables. Unlike the newer USB-C method, MHL cables use microUSB. As mentioned above, it can also power your device while providing digital video and audio.

  An MHL HDMI cable list on Amazon.
Amazon

Some projectors support HDMI, but you must specifically look for an HDMI port with an MHL label on your projector. If you do not see any, it will not power your device. Your Android device must also support MHL.

To connect via MHL, you should not have to do anything on your Android device other than connect it to your projector with a suitable cable. On your projector, switch the input to the corresponding MHL HDMI port to see your projected Android screen.

Wireless Connections

Miracast and Wi-Fi Direct are wireless standards that connect devices to other devices such as screens. Previously, Android officially supported Miracast but dropped it with Android 6 Marshmallow. However, Miracast still works with some Android devices because it is based on Wi-Fi Direct, which is still supported by Android.

RELATED: Declared wireless display standards: AirPlay, Miracast, WiDi, Chromecast, and DLNA

Unless both devices specifically state that they support Wi-Fi Direct or Miracast, is the best way to see if it will connect using one of these standards to try it.

To start, look for "Screen Mirroring", "Device Mirroring" or a similar named setting on your projector, then switch to that mode.

The best way to connect with Miracast is to use a third-party app, such as Castto, to make the connection. As it is no longer officially supported, it is not guaranteed to use Miracast with modern Android devices.

If so, use a Chromecast, cable connection, or try using Wi-Fi Direct.

Wi-Fi Direct

If you want to use Wi-Fi Direct, you can do this within Android directly. These steps may vary slightly depending on your version of Android and your device.

You need a projector that supports Wi-Fi Direct and lets you stream your screen using this method.

To get started, swipe down the screen to access your notification screen, then tap the gear icon to open your Android settings menu. Alternatively, you can access the "Settings" menu from the apps box.

 Touch the gear icon.

If you are on a Samsung device, tap "Connections." On other Android devices, you may need to tap "Network & Internet" instead.

 Press

Press "Wi-Fi" to access the Wi-Fi menu.

 Press

On the Wi-Fi menu, make sure the setting is turned on, and then press "Wi-Fi Direct." On other Android devices, you may need to press "Advanced" or "Wi-Fi settings" in this menu first, and then press "Wi-Fi Direct" to access that menu.

 Touch

Your device automatically scans for available Wi-Fi Direct devices. If it locates your projector, click the option to connect, and then follow the instructions.

Smart View on Samsung devices

If you own a Samsung device, you can use Smart View to connect wirelessly to some devices. Drag the message shadow down and press "Smart View" in the list of quick actions.

 Press "Smart View."

Your device is searching for Chromecast or Miracast devices nearby. Find your device and then click it to connect. Your Samsung device should connect to your projector and start streaming it.

 The "Smart View" menu on a Samsung phone.

Manufacturer apps

Some projector manufacturers offer their own Android apps that allow you to connect directly to the projector from your device via Wi-Fi.

Apps like Panasonic Wireless Projector, Epson iProjection and Projector Quick Connection are all examples of apps you can try, depending on the manufacturer's projector.

These apps may not allow you to project the entire screen, but they should allow you to project static images or document files to your projector. While this would not be a useful method for streaming media, it can be useful for business presentations.


Source link